Set up change approval
After these steps, a scheduled run whose membership changes more than you allow sends an alert or waits for approval before its actions run.
Before you begin
- Edition
- Professional and Ultimate
- Setting
- Track membership changes between runs is on. See CAB Settings.
- Permission
- To set the defaults: Campaign Audience Builder Admin. To set change approval on a schedule: the permission to schedule audiences. See Permission sets.
Change approval compares each scheduled run with the members of the run before. When more people joined and left than the schedule allows, the run either sends an alert and its actions still run, or skips its actions and pauses the schedule until someone decides. What the person who decides sees and does is in Review large membership changes.
Set the defaults for every schedule
Section titled “Set the defaults for every schedule”Every new schedule starts with the defaults from CAB Settings. Each schedule can change them unless you lock them.
-
Open CAB Settings, then under Configure select Changes & Approvals.
-
Turn on Track membership changes between runs, if it’s off. Until it’s on, the change approval settings are disabled and CAB shows Turn on run change tracking above to use change approval.
-
Under Change approval, choose what happens in When a run's membership change crosses the thresholds: Do nothing (off), Notify only: send an alert, actions still run or Require approval: skip this run’s actions and pause future scheduled execution until an approver decides.
-
Under Trigger, set Change exceeds (% of previous size), and is at least (members), or both. If you set both, the change must reach both.
-
Under Approver, choose who decides in Send approvals to: Specific user, Audience owner or User who scheduled the run.
-
With Require approval: skip this run’s actions and pause future scheduled execution until an approver decides, optionally set under If nobody decides after how many hours a pending approval is rejected.
-
Under Email notifications, optionally turn on Also email the approver, choose the sender and add up to five addresses to copy.
-
To stop schedules from changing these values, turn on Lock these settings for every schedule.
-
Select Save.
Every setting, with its default and values, is listed in CAB Settings.
Turn on change approval for a schedule
Section titled “Turn on change approval for a schedule”-
Open the audience, then select Schedule or Manage Schedule.
-
Open Change approval and turn on Enable change approval.
-
For When the threshold is exceeded, choose Notify only: send an alert, actions still run or Require approval: skip this run’s actions and pause future scheduled execution until an approver decides.
-
Set Change threshold (% of previous size), Minimum change (members), or both. If you set both, the change must reach both.
-
Choose who hears about it: Specific user, Audience owner or User who scheduled the run. With Notify only, the field is called Who gets alerted, and a specific user is picked under User to alert. With Require approval, the same two fields are called Who approves and Approver.
-
Optionally turn on Auto-reject if no decision, then set After (hours).
-
Save the schedule.
If an administrator locked the settings, the schedule says These settings are managed by your administrator. and you can’t change them.
How the change is measured
Section titled “How the change is measured”CAB adds the people who joined and the people who left since the previous run, and compares the total with the previous size. A run with 2,104 people who joined and 122 who left changed by 2,226 members; with a previous size of 2,830 that is 78.66%.
The first run of a schedule has nothing to compare with, so it runs without a check. When a later run can’t be compared reliably, Require approval holds its actions for a decision, and Notify only lets the actions run without an alert. See Review large membership changes.
Who can decide and resume
Section titled “Who can decide and resume”- The person chosen on the schedule gets the alert or the approval request, in the Salesforce notifications and, with Also email the approver, by email.
- Approving, rejecting and resuming a blocked schedule is open to the assigned approver and to users with Campaign Audience Builder Admin. Everyone else sees the run and the blocked schedule read-only.

